PaxLock is a new, battery powered Net2 access control unit in a slimline door handle.
Net2 PaxLock comes ready to fit a standard Euro profile lock case. It communicates with the Net2 server PC using the low power and secure wireless technology of Net2Air. Net2 PaxLock is designed for use with the Net2Air USB bridge or the Net2Air Ethernet bridge to give the advantages of a wireless networked access control system. Net2 PaxLock is simple to use and fast to fit because it is not wired into a mains power source; it is ideal for internal doors.
Installation – Paxlock can be fitted to some existing mortice locks, A europrofile mortice DIN lock is best, as this offers a mechanical override if there are ever any problems.
Fit the chosen mortice lock to the door and place the template provided over the spindle. Use the template to drill the required holes and then cut the spindle to the required size. Secure the Net2 PaxLock to the door and insert the batteries. Bind the unit to the Net2 system by presenting a pre-enrolled token. Paxton also offers the Net2Air site surveyor kit to check the site for wireless range prior to installation. Operation – Any changes made at the PC are communicated and stored in the Net2 PaxLock. When a user presents their token to the reader, the Net2 PaxLock identifies them and permits or denies access as appropriate.
The PaxLock in component form..To be fitted on new access control scheme in Wilmslow Cheshire using Paxton Net2 software
Paxton access control Net2 PaxLock systems in Manchester Stockport Macclesfield & Cheshire Access
control Paxton NET2 Manchester and Stockport. For more information on access control in Wilmslow, Stockport and Macclesfield